Drinking Water Protection
- Drinking Water Protection Home
- About Us
- A-Z Index of Contaminants in Water
- Community Public Water Supply
- Drinking Water Institute
- Drinking Water Revolving Fund
- Noncommunity Public Water Supply
- Source Water Protection
- Water Operator and Certification Training
- DWP Contacts
Related Topics
- Annual Reports
- Drinking Water Risk Communication Toolkit
- Factsheets
- Fluoridation Rule Revision
- Forms
- Invisible Heroes Videos: Minnesota's Drinking Water Providers
- Noncom Notes Newsletter
- Sample Collection Procedures (videos, pictures, written instructions)
- Waterline Newsletter
Related Sites
- 10 States Standards
- Clean Water Fund
- Health Risk Assessment – Guidance Values and Standards for Water
- Minnesota Well Index
- Water and Health
- Wells and Borings
Environmental Health Division
Rule Changes
Fluoridation Rule
The changes (below) replace the three previously prescribed concentrations with three new concentrations, which reflect the current state of community fluoridation science. The new target fluoride concentrations better balance the benefits of tooth decay prevention and control with risks of receiving too much fluoride.
Fluoride content.
The fluoride content of the water shall be controlled to maintain an average concentration of 1.2 0.7 milligrams per liter; the concentration shall be neither less than 0.9 0.5 milligrams per liter nor more than 1.5 0.9 milligrams per liter.
Last Updated: 03/31/2023